Explosively musical

Impressively fun & engaging signature that captures listeners at the very first sounds. Resolving detail retrieval, crystal clear highs, intimate mids and thick deep bass. Your music library will never sound the same with the iON-4’s novelty sonic design.

The hybrid structure of IEM is again updated!

Tri-brid Technology

3 types of driver with 1 Balanced Membrane driver being the heart, the iON-4 implements the  try-brid construction including a Magnetostatic super-tweeter, 2 Balanced Armature tweeters, and a Dynamic woofer sitting inside a 3D printed Sound Regulating Chamber. The purpose of this configuration is to aim for maximum consistency across the whole frequency band, with no irregularities despite having 2 different types of driver playing in unison.

3D Modelled & Printed sound chamber

 Breaking from the conventional practice of using passive crossover, iON-4 employs a 3D printed housing with an internal sound chamber, which was heavily tested and modeled digitally based on acoustical principles of speakers.

The end result is an organic signature which stems from signal being fed directly into driver without going through any passive components.

Specifications

  •       1x Magnetostatic super-tweeter, 2x Balanced Armature tweeters, 1x 8mm dynamic driver
  •       Nominal Impedance: 16ohm
  •       Sensitivity: 102dB @ 1kHz / 1mW
  •       3D printed Sound Regulating Chamber
  • 2 pin 0.78mm connector

Explosively musical

Impressively fun & engaging signature that captures listeners at the very first sounds. Resolving detail retrieval, crystal clear highs, intimate mids and thick deep bass. Your music library will never sound the same with the iON-4’s novelty sonic design.

The hybrid structure of IEM is again updated!

Tri-brid Technology

3 types of driver with 1 Balanced Membrane driver being the heart, the iON-4 implements the  try-brid construction including a Magnetostatic super-tweeter, 2 Balanced Armature tweeters, and a Dynamic woofer sitting inside a 3D printed Sound Regulating Chamber. The purpose of this configuration is to aim for maximum consistency across the whole frequency band, with no irregularities despite having 2 different types of driver playing in unison.

3D Modelled & Printed sound chamber

 Breaking from the conventional practice of using passive crossover, iON-4 employs a 3D printed housing with an internal sound chamber, which was heavily tested and modeled digitally based on acoustical principles of speakers.

The end result is an organic signature which stems from signal being fed directly into driver without going through any passive components.

Specifications

  •       1x Magnetostatic super-tweeter, 2x Balanced Armature tweeters, 1x 8mm dynamic driver
  •       Nominal Impedance: 16ohm
  •       Sensitivity: 102dB @ 1kHz / 1mW
  •       3D printed Sound Regulating Chamber
  • 2 pin 0.78mm connector

Testimonials

“At vero eos et accusamus et iusto odio dignissimos ducimus qui blanditiis praesentium voluptatum deleniti atque corrupti quos dolores et quas molestias excepturi sint occaecati cupiditate non provident, similique sunt in culpa qui officia deserunt mollitia animi” Patrick Thomson

“At vero eos et accusamus et iusto odio dignissimos ducimus qui blanditiis praesentium voluptatum deleniti atque corrupti quos dolores et quas molestias excepturi sint occaecati cupiditate non provident, similique sunt in culpa qui officia deserunt mollitia animi” Jeff Dow

“At vero eos et accusamus et iusto odio dignissimos ducimus qui blanditiis praesentium voluptatum deleniti atque corrupti quos dolores et quas molestias excepturi sint occaecati cupiditate non provident, similique sunt in culpa qui officia deserunt mollitia animi” Brenna Redding

www.000webhost.com